or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Broken Atomic Neox 412 Brake?
New Posts  All Forums:Forum Nav:

Broken Atomic Neox 412 Brake?

post #1 of 3
Thread Starter 
This might be a dumb question. I have a pair of 2005 Atomic Metron 9 Plus 9 (length 178) skis with Atomic Neox 412 bindings. One of the brakes is broken and needs to be replaced. The problem I have now is that I do not have the skis on hand. They are in storage in Colorado and I live in Virginia. Replacement brakes are not problem. The other problem is not sure which brake arm width I should get since they skis are not on hand.

Here is the link for the ski: http://www.sportsgearguide.com/scripts/alpineskimoreinfo.asp?ID=247

The arm widths available are 76, 81, 88 and 99mm.

Does anyone have any idea what brake width I need?

Thanks
post #2 of 3

Hi and Welcome to Epic!

The ski is listed as having a 74 mm waist, so the 76mm brake should be correct. This is a recommendation from looking at the specs you supplied, not from hands on knowledge. Typically the brake just wants to be wider than the width of the ski at the waist.

post #3 of 3
Thread Starter 
Thanks, found a set cheap.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Broken Atomic Neox 412 Brake?