or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Looking for a Railflex Jig
New Posts  All Forums:Forum Nav:

Looking for a Railflex Jig

post #1 of 5
Thread Starter 
I'm thinking i'm going to put a railflex binding onto my stockli laser sc's, but I can't find a jig anywhere.
post #2 of 5
 I've got one in my backshop, but that's not a very common jig
post #3 of 5
 Just use the RF bases as a template to mark the holes.  It practically serves as its own jig.
post #4 of 5
Quote:
Originally Posted by skier219 View Post

 Just use the RF bases as a template to mark the holes.  It practically serves as its own jig.


Yep. Cover the top o the ski with tape, measure 3 times, then drill away. They only trick is to leave a gap (3mm?) between the two railflex sections. The gap lets the plate flex.
post #5 of 5
 Yep, about 3-4mm.  I just use the diameter of a binding drill bit to set the gap.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Looking for a Railflex Jig