post #1 of 1
Thread Starter 
I am confused by the proper setting of forward pressure on the XBi CT binding.

The 2008-09 Nordica Technical Manual describes the proper forward pressure adjustment as follows:

- Check on the heel-piece the position of the
forward pressure adjustment rod.
The adjustment is correct when the rod head
line-up the notch (± 2mm) realized on the rear
heel-piece housing. (fig.4I)
- The binding is ready for skiing.

The illustration in the manual is not very helpful, nor is the text.

This leads me to conclude one of the two following settings is correct:

Reference mark on binding housing is within + or - 2mm of notch cut into indicator rod

Reference mark on binding housing is aligned + or - 2mm with the end of the indicator rod.

If anyone knows which is correct, I would certainly appreciate your input.