I had my soles canted earlier this season and plates have worn out. So I need to find some replacement ones. The shop that did it for me is closed for the season. I have found a bunch but none with my same hole pattern. I need 1.5 degrees and 2.5 degrees. The boot is the Falcon/Ghost.
Replacement Canting Shims
- 2 Posts. Joined 5/2009
- Select All Posts By This User
Bizz- Usually the shop planes the original boot sole down to the correct cant angle, adds the lifter, then routes the top of the boot lug down to the original din specifications. What this means is that you only have to replace the lifters and they do not have to be "canted lifters" as the cant is planed into the sole of the boot. Do you know if that is how it was done? If this is the case, you can order a lifter in usually 3, 5 and 8mm sizes. You probably have the 3 or 5 mm size. Those can be found from almost all of the major companies such as Salomon, Nordica, or Lange. You just have to figure out the original size.