I just purchased the K2 Obsethed and Marker Griffin combo but have noticed a small 'problem'; on one of the skis the heel piece part of the binding is mounted slightly off centre. It is about 2.5mm-3mm further to the left edge of the ski than the right edge. I rung the store and spoke with the tech who mounted the bindings and he says it was mounted using a jig and is within tolerance of the jig, he also sys it will not affect performance of the ski.
Has anyone had this before and any thoughts as to whether it will affect the skis performance or not? Also is there any adjustment left or right on the binding once it is mounted (seems unlikely as the skis are drilled)?
FWIW it will be beginning of March before I get to try the skis.