New Posts  All Forums:Forum Nav:

FS Merlin VI

post #1 of 24
Thread Starter 
K2 Merlin VI, 193, circa 1999 GS ski (99-65-88) w/a VIST GS plate and Marker MRR (turntable) din to 15. Only a few days
(<5) on them, $100 + ship.
post #2 of 24
If it's blinking...
post #3 of 24
Thread Starter 
Yup...the light still works
post #4 of 24
Then it's one up on you and me both, my friend.

[/gratuitous silliness bump]
post #5 of 24
Thread Starter 
c'mon....you know you want this ski.
post #6 of 24
$50 including shipping?
post #7 of 24
I had that ski shortly after it came out in a 198 cm. No plates but I had the Salomon Suspension mounted from another pair of skis.

I know I never came close to finding its top end. Its a solid ski, and if high speed cruising is your thing this ski won't disappoint.
post #8 of 24
Thread Starter 
Quote:
Originally Posted by Wear The Fox Hat View Post
$50 including shipping?

I'll trade you straight across for a botle of Middleton's.
post #9 of 24
middletons, that's $120 us dollars (but worth every penny)
post #10 of 24
Quote:
Originally Posted by irul&ublo View Post
I'll trade you straight across for a botle of Middleton's.

Maybe not.
How about a 12y/o Jamesons Special Reserve?
post #11 of 24

K2 merlin VI

Can you pm me some pictures? I am definitely interested for my husband but would like to see them

Thanks
Shastastar
post #12 of 24
Thread Starter 
Quote:
Originally Posted by shastastar View Post
Can you pm me some pictures? I am definitely interested for my husband but would like to see them

Thanks
Shastastar
will do...will take a few days
post #13 of 24
No Problem!!!
post #14 of 24
Thread Starter 

NOW WITH PICTURES!!!!!!!



Along with the skis, a copious amont of irul steeze is free!!!!








post #15 of 24
Thread Starter 
Quote:
Originally Posted by Wear The Fox Hat View Post
Maybe not.
How about a 12y/o Jamesons Special Reserve?
Well at least you didn't offer me that Protestant swill....


BUY MY SKIS!!!!
post #16 of 24
what are the binidngs set at? We are wondering if we can adjust them for the husband's boots, and sorry if you have all ready posted that and somehow I missed it
THANKS
SS
post #17 of 24
Thread Starter 
these were set for my old boots, sollys 27.5. I believe the soles were ~ 324. Not too sure how adjustable the binders are.
post #18 of 24

bindings size

Is there any way you can measure (in cm / mm) from the inside of the toe to the back binding inside and see what it is ? They normally only adjust + or - 2 cm so it's kind of important we get a clear idea of the range. We want to avoid having a new pair of bindings mounted if possible. Sorry for all the questions. Appreciate your help. THANKS

SS
post #19 of 24
You wouldn't need a new pair of bindings mounted regardless -- these should be able to be remounted on the existing plate.
post #20 of 24
Thread Starter 
Quote:
Originally Posted by shastastar View Post
Is there any way you can measure (in cm / mm) from the inside of the toe to the back binding inside and see what it is ? They normally only adjust + or - 2 cm so it's kind of important we get a clear idea of the range. We want to avoid having a new pair of bindings mounted if possible. Sorry for all the questions. Appreciate your help. THANKS

SS
I'll give it a measure, but if your husband's boot sole length is greater than 8mm above/below 324, remount will be likely needed. Alpinedad is right, you can remount on the plate, w/ the same binders.

I'd also sell the skis w/o binders for 60 plus shipping if you've got a set you can use.
post #21 of 24

That's okay

No I think we want them with the bindings. I should have the boot size tomorrow. I would just prefer that they are close, or that he is okay with it ( he asked for the measure. not me). We'll figure it out, he just was hoping.... not to have to remount. I am fairly certain he will pull the trigger ( Texas speak for purchase) I should know for sure in the next couple days.

Thanks
SS
post #22 of 24
Thread Starter 
Quote:
Originally Posted by shastastar View Post
No I think we want them with the bindings. I should have the boot size tomorrow. I would just prefer that they are close, or that he is okay with it ( he asked for the measure. not me). We'll figure it out, he just was hoping.... not to have to remount. I am fairly certain he will pull the trigger ( Texas speak for purchase) I should know for sure in the next couple days.

Thanks
SS
no prob, they ain't going anywhere.
post #23 of 24
Thread Starter 
Quote:
Originally Posted by shastastar View Post
Is there any way you can measure (in cm / mm) from the inside of the toe to the back binding inside and see what it is ? They normally only adjust + or - 2 cm so it's kind of important we get a clear idea of the range. We want to avoid having a new pair of bindings mounted if possible. Sorry for all the questions. Appreciate your help. THANKS

SS
I measured ~320. That's an estimate as I had to use a ruler, because I didn't have a metric tape.
post #24 of 24
sorry for the delay thanks for the measure. His ski boots are in storage, we are going to pull them today and take a look, but I think we are good to go. Should know by tomorrow

Thanks
SS
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Classified Archive