or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Marker Jester adjustment
New Posts  All Forums:Forum Nav:

Marker Jester adjustment

post #1 of 3
Thread Starter 
I have a set of skis with the jester, and I believe they were set up for a 310 boot. I have a 307 boot. Is the adjustment on the rear bottom of the heel..I can only find one screw, so I believe that is it.. Just wanted to ask before I start messing.. Is there a way to know forward pressure is ok..I did not see anything that would show that.

Lee
post #2 of 3
The forward pressure is correct when you insert your boot & the flat screw head is flush with the housing.

Do not adjust the screw with the boot inserted. Rather remove the boot, tweak the screw & then reinsert the boot.

A 3mm differemce is small. It should only take one, maybe two, screw clicks to get you there.
post #3 of 3
Thread Starter 
So it is the one screw in the rear center heel? Right..

If so, Thanks,
I"ll give it a shot tomorrow..
I got some 176 line chronics with the jesters for 250.00, so I did not think I could go wrong..Nice setup..Light too.

Lee
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Marker Jester adjustment