or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Remove a Look demo plate
New Posts  All Forums:Forum Nav:

Remove a Look demo plate

post #1 of 3
Thread Starter 
Help (again),

Does anyone know how to remove this plate? The screws that fasten the plate to the ski are below the sliding section seen in the picture. The plate must slide to expose the screw heads, but how is the upper half removed?

Michael
525x525px-LL-vbattach2584.jpg
post #2 of 3
Take that lever and push it hard to the right. At the same time, slide the toe piece off the front (or is it the back) of the plate. It must be removed to expose the 4 screws in the base plate. Give it some umph when sliding it off. You did not need to remove the toe piece from the middle plate btw...
post #3 of 3
Thread Starter 
Quote:
Originally Posted by DropCliffsNotBombs View Post
Take that lever and push it hard to the right. At the same time, slide the toe piece off the front (or is it the back) of the plate. It must be removed to expose the 4 screws in the base plate. Give it some umph when sliding it off. You did not need to remove the toe piece from the middle plate btw...
Thanks,

They do slide off the front and aggressive force is required.

Michael
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Remove a Look demo plate