I started sorting through my gear for the upcoming season. Unfortunately I found that two pairs of skis were damaged during a move. Each ski has one damaged edge and one pristine edge. I worked on one pair this morning, but was not able to get the entire edge sharp. I was concerned about taking too much material off one edge. Should I continue filing or just get a base grind and start from scratch? If the base grind is the way to go any recs for a shop in the York PA/Baltimore MD area? I was considering shipping them to Edgewise, but was hoping to avoid the expense. Thanks.
post #1 of 6
12/2/07 at 12:12pm