post #1 of 17
8/7/07 at 8:56am
If you do an "overlay" measurement, the van will just fit between the barriers, this is a bit +/- since the van is a bit back from the camera but it looks like it just may squeeze through.
Which also begs the question of why put up vehicle security barriers if, since a van could fit through, so could a small car?
OK, on the measurement thing, here's a very unscientific approach... count the paving stones.
In front of the van you can see the width of 4 paving stones (slight overhang to the left, slight gap to the right)
Then count the paving stones between the bollards - 3 then add about another half stone width to make up the distance to the bollards.