or Connect
New Posts  All Forums:Forum Nav:

Pocket 2 tuner?

post #1 of 3
Thread Starter 
Im sure this question has been asked and probably answerd. Is the pocket 2 tuner anygood for a file guide? How accurate is it?
I've noticed that the side edge works fair, however I'm very skeptical about the base edge.: Also is there a gauge of some kind that I can acuratly measure the degree of my edges, within a reasonable price?
post #2 of 3
I don't have the specs in front of me, but I remember reading somewhere that they are accurate to about 0.2 degrees. So, it could be anywhere from 0.8 to 1.2 if set to 1 degree.
post #3 of 3
All the edge angle guides I have found are pretty expensive- $60 min. and up to over $250 depending on the brand. You may want to take a look at the method the article/ tuning tip linked below on Tognar's web site (Volkl tech rep. is credited) has described using a true bar. Atomicman also pointed out this same method some time ago to me the with a message on the concept.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Tuning, Maintenance and Repairs