EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Bindings For Atomic SX9 Supercross
New Posts  All Forums:Forum Nav:

Bindings For Atomic SX9 Supercross

post #1 of 19
Thread Starter 
I recently purchased a pair of Atomic SX9 Super cross 180's. I was wondering if anyone has any recommendation on what type of atomic bindings I should purchase? Or where I can find some information on what bindings are comparable to my ski's.

post #2 of 19
post #3 of 19
Late Feb 2005 i and 3 of my ski partners bought Atomic SX-10's with the Atomic Neox 412 binding , . we each ski about 30 days a yr and found this arrangement super .
post #4 of 19
Thread Starter 
I was looking at the Atomic Neox 412 binding , i just wanted to make sure that these bindings will work with the SX9 and what people thought of them.
post #5 of 19
Read my thread link

I am pretty sure that the SX7 and SX9 models only take device bindings.

I would wait until you get your skis to verify this.
post #6 of 19
Thread Starter 
I have my ski's already , what should i be looking for that would tell me i need device bindings? If this is the case, what device bindings are good?
post #7 of 19
If your skis have the brake arms already attached and a track with a big screw in the middle of a colored piece of plastic then they take device bindings.

If you have a predrilled plate with various holes then they can take Atomic bindings.

http://www.sierratradingpost.com/pro...&base_no=71167

I am not sure which specific ones it can take based on the year of the ski.

The device 310 has a DIN range of 3-10 so if your normal DIN falls in the middle you are all set.

If your DIN is higher you can go with the Device 412 with a range of 4-12.

Take a pic of the ski.
post #8 of 19
Thread Starter 
My ski's def dont have break arms on them.

They do have a plate with pre drilled holes. So this means i can get any type of atomic bindings?
post #9 of 19
Quote:
Originally Posted by SickMo
My ski's def dont have break arms on them.

They do have a plate with pre drilled holes. So this means i can get any type of atomic bindings?
I am not sure if those can take the Neox bindings.

They can definately take these:
http://www.sierratradingpost.com/pro...&base_no=71282

Check out this thread for more info:
http://forums.epicski.com/showthread...hlight=xentrix
post #10 of 19
Thread Starter 
http://www.sierratradingpost.com/product_view_full_img.asp?image_file=71167%5F1%2Ej pg&product_name=Atomic+SX9+Supercross+Alpine+Skis+ with+Bindings&base_no=71167&dc=dcThat is my exact ski , Really want to purchase the Neox Bindings bc I heard good things about them and i heard the total opposite about the Device Bindings.
post #11 of 19
Quote:
Originally Posted by SickMo
http://www.sierratradingpost.com/product_view_full_img.asp?image_file=71167%5F1%2Ej pg&product_name=Atomic+SX9+Supercross+Alpine+Skis+ with+Bindings&base_no=71167&dc=dcThat is my exact ski , Really want to purchase the Neox Bindings bc I heard good things about them and i heard the total opposite about the Device Bindings.
Read the other post.

Your ski does not take the Device bindings.
post #12 of 19
Thread Starter 
So The Neox Binding Will fit ?
post #13 of 19
Quote:
Originally Posted by SickMo
So The Neox Binding Will fit ?
I'm not sure the NEOX will fit as the NEOX binding was introduced in the model year following that of your skis. I recently bought the same model SX9 as you and stuck with the older binding model. This is the one you want if it's in your DIN range:

http://www.cupolosports.com/atskibisx5.html

If not, just pick some up on eBay. I got some Xentrix 412 bindings (demo bindings) because I want to be able to loan this ski out when family visits. The Xentrix, CR, SX, and Race series should all fit the plate. I don't believe the Device bindings will. I'm not sure about NEOX, though.
post #14 of 19
rquick is correct that the Neox and device will not fit.
post #15 of 19
Thread Starter 
I have the Xentrix 412 bindings and i have heard bad reviews on them. Just wanted to get something better before i used them and had them mounted
post #16 of 19
Bad reviews from who?
post #17 of 19
Thread Starter 
Check this link out, seems people where having problems with the boots popping out of the bindings.

http://www.outdoorreview.com/cat/ski...x.aspx#reviews
post #18 of 19
I have called Atomic a couple xs in the past few days and customer service has been very helpful. I would say extremely helpful.800.258.5020
post #19 of 19
Quote:
Originally Posted by mkevenson
I have called Atomic a couple xs in the past few days and customer service has been very helpful. I would say extremely helpful.800.258.5020
very helpful
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Bindings For Atomic SX9 Supercross