EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Is it Possible to find a Pair of Marker MRR Downhill Bindings?
New Posts  All Forums:Forum Nav:

Is it Possible to find a Pair of Marker MRR Downhill Bindings?

post #1 of 17
Thread Starter 
My friend has a pair - the DIN goes up to 25 or something ridiculous.

I want a pair - does anyone know how I would go about finding a pair of these elusive beasts?
post #2 of 17
eBay - you just missed a set that was auctioned a few days ago.
post #3 of 17
Thread Starter 
Quote:
Originally Posted by Noodler
eBay - you just missed a set that was auctioned a few days ago.
noooooooooooooooooooooooooooooooooooooooooo
post #4 of 17
I have a new pair of the MR twincam's, but they are only a 3-10 DIN.
post #5 of 17
You might want to keep the number of a good Orthopede in you area handy along with that binding.
post #6 of 17
There were Markers up to DIN 24 and the 3000 or current 30.0 has DIN 15-30 (no MRR anymore).
You sure you want to use something like that?
post #7 of 17
there was a reason they went to 24 DIN...and they barely stayed on then
post #8 of 17
Beware the degradation into a Marker-bashing thread!
post #9 of 17
Quote:
Originally Posted by godwinaustin
My friend has a pair - the DIN goes up to 25 or something ridiculous.

I want a pair - does anyone know how I would go about finding a pair of these elusive beasts?
Don't know where you can find those, but you can find Look ZRs/P18s, and Rossignol Pro 180s (with the FKS toe) fairly easily on eBay and tgr.com, which have similarly ridiculous retension though the din goes up to ONLY 18. Salomon 920s (16-20 DIN) are also relatively common and a great binding.
post #10 of 17
Quote:
Originally Posted by waxman
there was a reason they went to 24 DIN...and they barely stayed on then
haha. it's funny cuz it's true!
post #11 of 17
check ebay for fischer race bindings with high DIN - i think from www.skidepot.com up in maine
post #12 of 17
post #13 of 17
DIN 4-12 and those are the ones with the heel piece that had something like an 80% breakage rate FYI
post #14 of 17
Quote:
Originally Posted by waxman
DIN 4-12 and those are the ones with the heel piece that had something like an 80% breakage rate FYI

Plus, those are the step-in's not the true rotomats.
post #15 of 17
Quote:
Originally Posted by Phil Pugliese
Plus, those are the step-in's not the true rotomats.
Phil, do you mean Rotomat LS, FD or Compact?
post #16 of 17
MRR, Turntable, with brakes. I have a pair sitting here on my desk. They were with my exploding Tecnica TNT boots, (see my other post) Here are the din #'s. Heal Din setting: Center 5-15, right and left spring cam 5-13, Toe 5-13.
post #17 of 17
Quote:
Originally Posted by Phil Pugliese
Plus, those are the step-in's not the true rotomats.
Then again ... the guy asked for MRRs, not Rotomats. Depending on exactly how "true" you want to be, you might take the position that no "true Rotomats" were called MRR.

MRRs are pretty common on the used market. Ones with the racing springs (DIN to 30, or whatever) are a lot less common.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Is it Possible to find a Pair of Marker MRR Downhill Bindings?