or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Help With Bibbibg Hole Pattern
New Posts  All Forums:Forum Nav:

Help With Bibbibg Hole Pattern

post #1 of 7
Thread Starter 
I got these off eBay trying to figure what might screw right in without re drilling



post #2 of 7

Looks like a Marker Griffon/ Jester/ Squire

post #3 of 7
Thread Starter 

Thanks Demos or not,

 

 got these things for 170 bucks practically new they are 170's but should be great for the tight trees at Bohemia where they do not groom

post #4 of 7
Thread Starter 

Another thing they are 2mm off center, worries?

post #5 of 7

So long as the pattern is straight relative to the ski I would not be concerned about them being off by  2 mm. Because they are off, I would carefully check this.

 

To check which binding they are go here: http://www.tetongravity.com/forums/showthread.php/153971-Binding-Mount-Paper-Templates  and print off the ones you think they might be (make sure your printer is at 100%).  You will also be able to check the BSL with the paper template to make sure it fits your boot.

 

Should be able to reuse the holes.  If you get a spinner you should take them to a shop for a helicoil.

post #6 of 7
Thread Starter 

Thanks sir, yes I check all even just 2 mils off and Axial 2/ Look PX it is.  Short boot sole I will have a shop redrill 

post #7 of 7
Thread Starter 

Or actually after watching the video from teton may do it myself.  Hate walking into a shop to drill stuff off e bay.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Help With Bibbibg Hole Pattern