or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ask the Boot Guys › New Ski Boots won't fit Old Bindings
New Posts  All Forums:Forum Nav:

New Ski Boots won't fit Old Bindings

post #1 of 3
Thread Starter 

Hello everyone, 

 

I recently started skiing. I had rented skis and boots my first time and now I wanted to buy equipment. Short story, my dad's friend was able to give me his old skis and bindings (roughly 5 years old) to me for free. I bought new boots right after. I purchased K2 Spyne 110 (2014s model) in a 30.5. Basically when i look online to see how to adjust ski bindings they all have a dial like thing in the middle of the binding but mine don't have that. My bindings are made by Marker M11.00. I turned the phillips screw no the back of the binding to make it the biggest it can be and its still too small by a good amount. I was thinking maybe i have to bring them to my local shop to get the redrilled? 

 

Any suggestions are appreciated. 

 

If you need pictures just let me know and i will post them.

 

Thanks, 

Tom.

post #2 of 3

 bindings need to be removed, and new holes drilled into the ski (for the right size)

 

best to let a shop handle this....

post #3 of 3
Thread Starter 

Thanks what i kind of figured. Thanks for the reply.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ask the Boot Guys
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ask the Boot Guys › New Ski Boots won't fit Old Bindings