or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Dynastar Riser Plates Binding Compatibility
New Posts  All Forums:Forum Nav:

Dynastar Riser Plates Binding Compatibility

post #1 of 5
Thread Starter 

Hello! I recently acquired a pair of Dynastar Speed Course skis with the riser plates. Are all bindings compatible with these plates or do only the Look PX bindings work with them?

Thanks

post #2 of 5


It depends on the year and model of the ski.  The race stock skis require the PX Race binding which has a shorter screw spacing on the heel track.  The standard Px12 will not fit

post #3 of 5
Thread Starter 

They are the 2013 Speed Course WC model.

post #4 of 5
Quote:
Originally Posted by Fleetline View Post

They are the 2013 Speed Course WC model.

You needthePX race then - you can get them in 12,14, 15 or 18 din or preferably the MFX race in 15 or 18. Same binding but the MFX has the interconnection plate . You can usually find the 18 cheaper than the 15 funnily enough. It is heavier though and the Din starts at 10
post #5 of 5
Thread Starter 

Thanks for the help.. What is the advantage of the MFX? What Din would you recommend, I am 6'4, 200 lbs with around 350mm boot sole length and I mostly just carve at high speeds..

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Dynastar Riser Plates Binding Compatibility