or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Dalbello Scorpion DRS 130 Liner
New Posts  All Forums:Forum Nav:

Dalbello Scorpion DRS 130 Liner

post #1 of 3
Thread Starter 

Hello,

 

Dalbello website states Scorpion DRS 130 Liner is heat moldable. Does anyone know what machines are rated to mold this innerboot and, if so; what temp, time, etc?

 

TX!

post #2 of 3

This is Dalbello's highest performance boot, with a thin liner and close shell fit. So my hunch is that "moldable" on the site means you could heat it, like any liner, but you don't need to. And IME thin racing boot liners do better if you just let them reshape through skiing. If you're determined, I'd check further with Dalbello or your shop. The dry rice approach you can find on Intuition's own site works well, but the temps and time vary by foam thickness and density. In general, Dalbello's Intuition liners are a bit less dense than Intuitions own line, for instance, and anyway not sure if this is actually made by Intuition. If not, then the foam will be different; Intuition's foams are proprietary. 

post #3 of 3
Thread Starter 

TX B!

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Dalbello Scorpion DRS 130 Liner