or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Removal Of Maker MRR Bindings
New Posts  All Forums:Forum Nav:

Removal Of Maker MRR Bindings

post #1 of 4
Thread Starter 

At my wife's pleading, I am finally getting rid of my 1980's Atomic ARC Team Bionic RS 203cm skis that someone wants to use to make a bench.  I would like to save the Marker MR Racing bindings.  I have removed the heal pieces but can't seem to figure out how to remove the toe pieces.  Can anyone shed light on how the vintage Marker MR, MRR and M4, etc. toe pieces come apart to unscrew them?  Thank so much for any guidance.

post #2 of 4

back off the DIN all the way,  pry open each  toe wing(one at a time) and remove the  exposed screw.  then Push or pull the binding forwards or backwards(I can't remember)  to slide it off of the clip.  them unscrew the clip.  If you need more info I can take and post a pic.

 

Royal

post #3 of 4
Quote:
Originally Posted by royal View Post
 

back off the DIN all the way,  pry open each  toe wing(one at a time) and remove the  exposed screw.  then Push or pull the binding forwards or backwards(I can't remember)  to slide it off of the clip.  them unscrew the clip.  If you need more info I can take and post a pic.

 

Royal

M4 Toe- hold one wing open and put a screw driver (or pencil.pen. ect) through the hole in the wing arm as you hold it open, that will make access to the screw easier. 

 

MR/MRR toe- back two screws should be exposed then as Royal said slide toe forward to get to third hidden screw.

post #4 of 4
Quote:
Originally Posted by ra4308 View Post
 

At my wife's pleading, I am finally getting rid of my 1980's Atomic ARC Team Bionic RS 203cm skis that someone wants to use to make a bench.  I would like to save the Marker MR Racing bindings.  I have removed the heal pieces but can't seem to figure out how to remove the toe pieces.  Can anyone shed light on how the vintage Marker MR, MRR and M4, etc. toe pieces come apart to unscrew them?  Thank so much for any guidance.

 

Atomic ARC Team Bionic RS

 

 

"someone wants to use to make a bench"

 

:eek  :nono::dunno

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Removal Of Maker MRR Bindings