EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ask the Boot Guys › Appropriate boot dryer for boots with moldable liners
New Posts  All Forums:Forum Nav:

Appropriate boot dryer for boots with moldable liners

post #1 of 2
Thread Starter 

My wife and I both got new boots this season. Both are the kind where the liners are heated and molded to your foot. We had been using the DryGuy Thermo Air boot and glove dryer for several years, and I was wondering if it might be heating the boots up to the point that the custom molding would be compromised. At the end of the season, one of them burned out, so I need to buy a new boot dryer and I'm wondering if there are now boot dryers specifically designed to be compatible with boots with moldable liners. BTW, the DryGuy Thermo Air was very loud compared to what we had previously (which was replaced because it also failed). I'm looking for specific product suggestions that are OK with moldable liners and (if possible) not so loud. Thanks!

 

John

post #2 of 2

Hey johnb

 We heat fit many liners in our shop. The boot dryers you buy to dry your boots are not hot enough to change the shape of the liner. Many of these dryers blow cool air to help evaporate moisture. We sell snapdry by hotronics in our store. It works very well.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ask the Boot Guys
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ask the Boot Guys › Appropriate boot dryer for boots with moldable liners