EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ask the Boot Guys › How to install booster straps on my Dalbello Krypton Rampages (pics included)
New Posts  All Forums:Forum Nav:

How to install booster straps on my Dalbello Krypton Rampages (pics included)

post #1 of 3
Thread Starter 

Hey Guys! There are tons and tons of booster strap articles, but I would appreciate some specific advice on how to install them and remove the existing strap from my 2009 dalbello krypton rampages.  I'm not sure if the fasteners on the boot straps can be removed, or how.  Thanks for the help!

 

post #2 of 3

simple.....

 

you need to either drill out or grind the backs off the two mounting rivets and remove them, the strap will slide right out

 

to install the booster slide it through where the old strap was, get it centred (remember there will be tension and stretch on it so it might be easier to put the boot on tighten up the strap and have a friend do the next bit)

mark where the mounting holes are in the shell, make holes in the booster ( nail heated on a blow torch or similar is easiest) then put screw in rivets thought the whole thing 

 

alternatively take it to your local shop who will have all the tools and fixings and do it much quicker for a few $ or the price of a couple of beers

post #3 of 3
Thread Starter 

Thanks CEM! Because I don't currently have a drill, nor do I have experience with riveting, I think I will just follow your advice and get someone more experienced to do it (although it would be a good learning experience I guess). Happy skiing and thanks again for your help!

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ask the Boot Guys
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ask the Boot Guys › How to install booster straps on my Dalbello Krypton Rampages (pics included)