New Posts  All Forums:Forum Nav:

Marker Barons-sizing

post #1 of 4
Thread Starter 

Have a line on some of last years/new Barons size large.  I have a 305 boot which i believe is where the Baron Large starts.  Would this work and be safe etc.  ?

post #2 of 4

The large does start at 305mm but if you ever down size your boot or even get the same size in a different model and the sole length happens to be smaller than 305 it will not work. Also it would be better to get the small because you would have less binding spanning toe to heel and less of the flat spot that AT bindings create.

post #3 of 4
Thread Starter 
Quote:
Originally Posted by skiessentials View Post

The large does start at 305mm but if you ever down size your boot or even get the same size in a different model and the sole length happens to be smaller than 305 it will not work. Also it would be better to get the small because you would have less binding spanning toe to heel and less of the flat spot that AT bindings create.

 

Thankyou, thats what I was thinking also avoiding the edge of suitability.  You reasons are good thanks for the input.

post #4 of 4

Pete, going to do some touring this season? I can show you some great spots around the area.. :)

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion