EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Bindings for Nordica HR Pro Burner
New Posts  All Forums:Forum Nav:

Bindings for Nordica HR Pro Burner

post #1 of 6
Thread Starter 

Hello I'm trying to decide what bindings to get for the Nordica HR Pro Burner 170 skis I just purchased.  I'm 5'9" and around 155lbs.  I'm intermediate/advanced in skill level and I like to ski pretty aggressively.  Mostly on resort at this point.  Also may get into the park a decent amount too hopefully.

 

Anyways, some of the bindings I was looking at are:

 

Look PX 12 90mm

Marker Squire Schizo 90mm

 

Also, 90mm would be the proper size for the brake for these skis right?

 

Any thoughts on these two options?  I'm definitely open to other suggestions, just trying to find a good deal.  Thanks in advance!

post #2 of 6

You're on the right track with either of those.  The Look is a little easier to get into and out of. 

post #3 of 6

You might want to step up to the griffon schizo or just the regular griffon instead. As you progress in your skiing you might want a higher din range. If I were you I'd also look at the STH 12 or 14 (driver toe) and the rossi FKS 12 or 14... both are awesome bindings as well.

 

The older px 12 has been going for cheap on evo. You could probably make the 80mm brakes fit as the nordica is a 84 waist right?

 

http://www.evo.com/outlet/alpine-ski-bindings/look-px-12-80mm-brakes.aspx#image=48191.Color.Hardgoods_Blue_Image.jpg

 

pretty hard to go wrong at 110$....

post #4 of 6
Thread Starter 

Thanks for the replies.

 

I'll definitely look into those other ones your mentioned esales.

 

Yes the skis are an 84 waist.  Are you sure that the 80mm brakes would fit them without any issues?  I don't know much about all of this so I just want to be sure before I buy anything.

 

I had actually seen those PX12's on evo.com earlier but I thought they wouldn't fit.  I'll likely go for those if I find out they will fit the skis.

 

Really appreciate the help.

post #5 of 6

It will be close, you might have to bend them slightly to get your skis to fit.... But I've got a better deal for you I think. Pm coming your way...

 

$130 for 2012 Solly STH 12 Drivers should work great. Just use the coupon I'm sending you.


Edited by esales09 - 8/1/12 at 12:44pm
post #6 of 6
Thread Starter 

Thanks for the PM esales!  You rock, really appreciate it!

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Bindings for Nordica HR Pro Burner