EpicSki › The Barking Bear Forums › Ski Training and Pro Forums › Racing and Big Mountain Competitions › centre mark on nordica rd sl ski 2011
New Posts  All Forums:Forum Nav:

centre mark on nordica rd sl ski 2011

post #1 of 3
7/27/12 at 12:33pm
Thread Starter 
On a pair of nordica rd .sl skis I have there is no mark on the side wall for centre mark.
There is a small notch in the metal side pairs on the top edge is this the centre mark of ski if so it mounts bindings on the front holes so the binding is in the most forward position .
Bindings marker comp 16.0 ,plate marker piston .
Reply
post #2 of 3
7/27/12 at 2:43pm
With the piston plate you can (depending on your boot size) play about with the positioning to find your own sweetspot. On a full race stock it is more about personal preference. I normally like to be one seat of holes further forward on my slaloms on a 284 BSL. If you want a starting point use the corresponding front and rear holes to match your boot. ( trying to remember if the piston plate only has 3 front settings or not?.?.)
Reply
post #3 of 3
7/27/12 at 2:54pm
Thread Starter 
Yep my plate only has 3 front holes . Boot length 304 .
So I may try the middle as a starting point.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
EpicSki › The Barking Bear Forums › Ski Training and Pro Forums › Racing and Big Mountain Competitions › centre mark on nordica rd sl ski 2011