EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ask the Boot Guys › Dobermann Aggressor 150 vs. 160
New Posts  All Forums:Forum Nav:

Dobermann Aggressor 150 vs. 160

post #1 of 3
Thread Starter 
Hey guys,

Im wondering where the difference in stiffness was built into the 160 in comparison to the 150, both in the aggressor model. It's a dated question, and I apologize if it is tucked away somewhere in threads past, but most of the focus had been on the 150 and I cant pin it down. Thicker plastic? Lower shell runs higher up through the cuff etc.? Can't find the difference in specs

Thanks in advance
post #2 of 3

density of the injected plastic. same build, stiffer plastic in the lower shell. to identify what you have, the lower shell will be stamped "med" instead of "soft".

 

jim

post #3 of 3
Thread Starter 

Thanks Jim. Good to know.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ask the Boot Guys
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ask the Boot Guys › Dobermann Aggressor 150 vs. 160