EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Tuning, Maintenance and Repairs › Looking to buy ski/snowboard tuning machinery
New Posts  All Forums:Forum Nav:

Looking to buy ski/snowboard tuning machinery

post #1 of 14
Thread Starter 

Hey gang !

 

I am located in Ontario Canada, and I'm searching for any used shop service machinery in working or not working condition.

 

Wintersteiger, Montana or Reichmann preferred, but will consider other brands like Grindrite, Allstone etc.

 

Stone Grinder - ski only and or snowboard sized stones - anything..

 

Belt Sander - ski or snowboard (or combo sand / stone grinders)

 

Side Edge Grinder - already have one but would consider another, or if its integrated with a stone/sand grinder.

 

Obviously the above would have to be a local (Ontario/Quebec) purchase, due to the weight of these monsters.

 

Also looking for Polyman or similar hand held base extruder (p-tex gun/welder), I would pay shipping on this item, and would purchase this item from anywhere in North America.

 

PM me your replies with brand and model number and contact info.

 

I have found some equipment for sale locally, but thought I'd throw this out there.

 

Big Thanks,

 

Chenz

post #2 of 14
post #3 of 14
Thread Starter 

thanks for the heads up, but he's too far away for that heavy a machine(shipping out of the question).  the phase converter he's sellin is a steal, wish i was a bit closer.

post #4 of 14
Quote:
Originally Posted by Chenzo View Post

thanks for the heads up, but he's too far away for that heavy a machine(shipping out of the question).  the phase converter he's sellin is a steal, wish i was a bit closer.



Rental Truck Road Trip!   

 

 

Write it up as an odyssey, it'll sell itself.

 

post #5 of 14

heres one right in collingwood little pricy but you can probally talk the guy down and you save in the shipping http://www.tetongravity.com/forums/showthread.php/248784-FS-Alliston-base-grinder-waxer?highlight=

post #6 of 14
Thread Starter 

ya - saw that one..that machine is barely worth $250 - still looking for a 150mm stone grinder, and a winter,montana,skid,reich ptex welder though.

 

thanks for the heads up.

post #7 of 14

If you are still looking, check these guys out ... www.rapidedgetuning.com ... they are in the Collingwood area

post #8 of 14
Thread Starter 
Quote:
Originally Posted by Peakscoach View Post

If you are still looking, check these guys out ... www.rapidedgetuning.com ... they are in the Collingwood area

Ya, I saw those on sale at home depot last weekend.  hahaha

post #9 of 14

I have a Grindrite  ST 3200 In excellent shape. I own a shop and I am purchasing a new machine. I am moving an I don't have the room for the 3200  .  If it were not for it's size I would not be selling ! This is a very reliable stone / Belt machine that was over built. I purchased new at over 30,000.00 in 1999 . I am selling the machine for 7,500.00 and I could deliver to Northern Maine.

 

 Bob at Sea&Ski    508-992-2662

post #10 of 14
Thread Starter 

Thanks Bob for letting me know.

post #11 of 14

Bob, any pictures of the grindrite? I don't think I'm too far from you. Thanks

post #12 of 14

Hi Chenzo

I am the Montana Rep for Ontario and we do have used Ski Tuners, Sander Edge sharpeners and waxers

Please contact me at tomfoster@rogers.com and I can send a list

T

post #13 of 14

This is a long shot, but are you still looking for ski machinery? We have a Reichmann ski tuning machine, and an edger, wintersteiger , press, molds etc. Please let me know if you are interested. My email is solideogloria8@gmail.com

 

regards,

Joel

post #14 of 14
Thread Starter 
Hey Joel, email sent. Thanks for posting.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Tuning, Maintenance and Repairs
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Tuning, Maintenance and Repairs › Looking to buy ski/snowboard tuning machinery