or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Tuning, Maintenance and Repairs › fwd Pressure adjustment on Rossignol Axial 140 race
New Posts  All Forums:Forum Nav:

fwd Pressure adjustment on Rossignol Axial 140 race

post #1 of 4
Thread Starter 

I have the Rossi Axial 140 on a 9x gs ski w/plate and it has the heel adjustment on a track via screw. is the correct fwd pressure obtained by a flush screw or is there an indicator on the toe? there is no indicator on the heel like the axial 2's.  I do plan on having a tech check it out but I'm trying to determine if I need to remount to fit a different boot. it looks like I'boot center.JPGm fwd 7.2mm of the ski center so that should be fine for the 188cm 22r gs skis for cruising groomers me thinks.

thanks

Charlesheel adjustment screw.JPGToe.JPGbinding boot combo.JPG

post #2 of 4

Axial.JPG

post #3 of 4
Thread Starter 

Regarding the position of the fwd pres screw. Just trying to make sure what they mean by flush and to which part. Below the screw or above the screw?  here's the two photos.1.JPG2.JPG

post #4 of 4

In between...

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Tuning, Maintenance and Repairs
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Tuning, Maintenance and Repairs › fwd Pressure adjustment on Rossignol Axial 140 race