or Connect
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Marker binding forward pressure?
New Posts  All Forums:Forum Nav:

Marker binding forward pressure?

post #1 of 3
Thread Starter 

I just got a pair of Blizzard Magnum 7.6's on the net. The dealer took my boot sole length and will set up the binding as far as that, but I'll need to set my own forward pressure, (I know my DIN). Does anyone know how to set the pressure on this model? I've done the job many times before, but each binding is different, (marks between something, etc).

 

Thanks!

post #2 of 3

I may be wrong, but if the dealer is setting the binding up for your boot sole length, im pretty sure the FP will be set at the same time.

post #3 of 3

PontoonMcConks is correct, FP should be set by shop but to check click boot in the binding and the silver screw on the back of the binding should be flush with the housing. If it either sticks in or out then corrections need to be made. Should be OK though.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Ski Gear Discussion
EpicSki › The Barking Bear Forums › On the Snow (Skiing Forums) › Ski Gear Discussion › Marker binding forward pressure?