Posts by snevit

Mudfoot,Thank you very much for this pointer: it looks like my setup (Comfort) is exactly as descibed on the TGR website: 30mm above the ski at the heel and 20mm at the toe. So, I guess my installation is what it should be. It's...

The  toe is 1/2 inch above the ski, about 1/4 inch above the binding plate: Here  is  what the whole set up looks like:

My estimate (inch and a half) was a bit off, but still it's an inch from the ski and 3/4 inch from the base of the binding plate (no brakes). The pins are in the boot holes fully engaged. Here's what it looks like: 

I am transitioning from Fritschi to Dynafit touring bindings. Just had my first pair of TLT Comforts installed... and was surprised to see that the boot does not rest on the ski but is actually suspended by the pins of the binding...