EpicSki  ›  The Barking Bear Forums  ›  Skiing Forums  ›  Tuning and Maintenance  ›  Volkl Motion Easy Step TT bindings removal
Forum Nav More Forums | All New Posts | New Thread

Volkl Motion Easy Step TT bindings removal

#1
Rating: 0
11/5/09 at 4:33pm
  • Joined: October 2007
  • Location: Toronto, Ontario and Kelowna, B.C.,Canada
  • Post Count: 105
I bought a pair of Volkl Attiva 5 Star skis with the above bindings for my GF.

I am trying to remove the bindings from the rails. I turned the centre dial to move the toe piece and heel piece apart, and the heel piece eventually disengaged from the plastic thread, so I managed to slide it off the rails.

However, I am having difficulty with removing the centre dial and toe piece. I have turned the screw on the side of the centre piece to the unlock position, but the centre piece still won't move.

What am I missing?

Export to Wiki
#2
Rating: 0
11/5/09 at 7:42pm
  • Joined: January 2006
  • Location: Cadillac, MI
  • Post Count: 552
You may find an allen or torx head screw on the side of the binding, somewhere near the center or toe piece of the binding. This screw goes all the way through the binding and rails to keep it in place. Removing this screw (you'll need an allen wrench on both sides of the binding)  and pulling it all the way out of the binding should allow you to slide the remainder right off. The center dial is not designed to hold any part of the binding to the ski, it only adjusts the size of the binding.
Export to Wiki
#3
Rating: 0
11/6/09 at 9:45am
  • Joined: October 2007
  • Location: Toronto, Ontario and Kelowna, B.C.,Canada
  • Post Count: 105
Thanks for your help. There was a slot-head screw on the side of the centre piece, but in the unlocked 9 o'clock position the screw still remained stuck in place. And it didn't go all the way through to the other side. However, I managed to pry it loose with a dental pick and remove it, and then the centre piece and toe piece could slide freely on the rails.
Export to Wiki
Forum Nav More Forums | All New Posts | New Thread