EpicSki  ›  The Barking Bear Forums  ›  Skiing Forums  ›  Ski Gear Discussion  ›  Another Head FF14 On CP13 Installation Question
Forum Nav More Forums | All New Posts | New Thread

Another Head FF14 On CP13 Installation Question

#1
Rating: 0
10/27/09 at 7:32pm
  • Joined: January 2004
  • Location: Montreal, Canada
  • Post Count: 7
I just received a pair of iSupershape Magnums that I got on eBay to replace my aging Volkl 724s, and decided to ask before I did anything stupid... To install the FF14 bindings on the CP13 plate, do I simply line up the binding screws with the appropriate pre-drilled holes in the CP13 plate, and then screw directly into them, or is there something special which needs to be done before that? Thanks.
Export to Wiki
#2
Rating: 0
10/27/09 at 9:22pm
  • Joined: August 2004
  • Location: N. Lake Tahoe
  • Post Count: 1,020
You got it.  Don't forget to have the beer handy to ensure it goes smoothly. 
Export to Wiki
#3
Rating: 0
10/27/09 at 10:13pm
  • Joined: May 2009
  • Location: Bay Area & Tahoe
  • Post Count: 348
Download this manual.

Instructions for mounting Freeflex Pro bindings are on page 18 (which is page 20 in the PDF itself).  You'll mount heel first, then toe.
Export to Wiki
#4
Rating: 0
10/28/09 at 9:27pm
  • Joined: January 2004
  • Location: Montreal, Canada
  • Post Count: 7
... exactly what I needed. Many thanks, TheDad. But I'm out of the prerequisite beer to do the job as per ScotsSkier's pertinent advice, so I'll just run out, stock up, and then get my gear ready.

Thanks again

Phil
Export to Wiki
#5
Rating: 0
10/29/09 at 8:42am
  • Joined: May 2009
  • Location: Bay Area & Tahoe
  • Post Count: 348
No worries.

With FFs, the trick is to make sure that you follow directions for placing the band and activating the spring.  I've had them installed by shops that have failed to do that.  Always a good idea to check it yourself.
Export to Wiki
Forum Nav More Forums | All New Posts | New Thread